EZRJ45 Cat5e Plug Information
The EZ-RJ45 connectors feature openings that allow wires to be inserted, and extended out the front providing increased performance, wire sequence verification, and no wasted connectors, crimps, or bad terminations. This allows the technician to easily verify the wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance.
The EZ-RJ45 Connector shall meet FCC part 68 and Category 5e requirements when used with Leviton's EZ-RJ45 Crimp Tool. It shall be constructed with phosphor bronze contacts and a polycarbonate body. It shall allow UTP wires to extend through the body and out the front to verify wire sequence prior to termination.
- Through holes allow wire pairs to be inserted through front of connector.
- Available for Cat5, Cat5e, and Cat6. RJ12/11, and RJ45.
- For use in telephone & security installations.
- Faster, easier terminations with reduced scrap.
- For specialized telephone installations & communications equipment.
- For applications requiring custom/specific wire configurations.
- Works on solid or stranded wire.
- Clear housing for wire sequence verification