The EZ-RJ45 connectors feature openings that allow wires to be inserted, and extended out the front providing increased performance, wire sequence verification, and no wasted connectors, crimps, or bad terminations. This allows the technician to easily verify the wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance.
The EZ-RJ45 Connector shall meet FCC part 68 and Category 5e requirements when used with Leviton's EZ-RJ45 Crimp Tool. It shall be constructed with phosphor bronze contacts and a polycarbonate body. It shall allow UTP wires to extend through the body and out the front to verify wire sequence prior to termination.